+7 777 666 7321

Categories

Y90QJ(D)-6T (iron foundry)

A pump immersed below the level of the pumped liquid. This ensures the lifting of liquid from great depths, good cooling of the pump components, and allows the lifting of liquids with gas dissolved in it.

Y90QJ(D)-4T (iron foundry)

A pump immersed below the level of the pumped liquid. This ensures the lifting of liquid from great depths, good cooling of the pump components, and allows the lifting of liquids with gas dissolved in it.

Y90QJ(D)-2T (cast iron model)

A pump immersed below the level of the pumped liquid. This ensures the lifting of liquid from great depths, good cooling of the pump components, and allows the lifting of liquids with gas dissolved in it.

Wide Type Screw Centrifugal Pump

One of two types of dynamic vane pumps, in which the working fluid moves in a continuous flow due to the interaction of this flow with the moving rotating rotor blades and the stationary housing blades.

Wear-Resistant Hose

It is mainly used for the transportation of fluids containing solid particles such as particles, gravel, cement, quicksand, concrete and gypsum.

Vertical Self Priming Pumps

WFB series non-sealed self-control self-priming pump adopts non-leakage V-shaped seal assembly, which eliminates the packing seal, packing seal and mechanical seal of traditional water pump, and completely overcomes the “running, running, dripping and leaking”, which is a substitute for the original various Ideal equipment for long-shaft submersible pumps, submersible pumps, and submersible sewage pumps.

Vertical Multistage Pump

VMSS is a non-self-priming vertical multi-stage high-center pump (hereinafter referred to as the pump), with high efficiency, low noise, mild corrosion resistance and tight structure reading.

Vertical Multistage Centrifugal Pump

Water supply, industrial pressurization, industrial liquid transportation, boilers, water treatment, cleaning, electronics industry, environmental protection.

Vertical Direct Connection Centrifugal Pump

The product is suitable for conveying thin and clean. Non-erosive, non-integrative and explosive. And it does not contain solid particles, fibers or liquids with physical and chemical properties similar to water.

Trash Handling Submersible Pumps

WQ type non-clogging submersible sewage pump is a new generation of pump products successfully developed on the basis of the introduction of foreign advanced technology and combined with the use characteristics of domestic pumps.

Transfer Booster Pump

KCB gear pump is also known as gear oil pump. This pump is suitable for conveying various oils, such as heavy oil, diesel oil, and lubricating oil.

The Coupling Of Centrifugal Pump

It is understood that self-priming units can remove air currents from the suction pipe.

Suction Pump Trailer

The sewage pump trailer adopts the sewage pump with high self-priming capacity designed with open impeller, which can directly self-priming after the first filling. It is driven by matching diesel engine without external power supply.

Submersible Portable Pumps

Due to its small size and light weight, the Submersible Portable Pump is especially suitable for underground water pumping in rural areas, farmland irrigation.

Straight In Suction Pumps

ZX series self-priming pump is an energy-saving pump product developed after absorbing, digesting and improving according to relevant technical data at home and abroad.

Standard Centrifugal Pumps

CZ series standard chemical pump is a horizontal, single-stage, single-suction centrifugal pump; its size and performance conform to DIN24256/ISO2858 standards.

Stainless Steel Diaphragm Pump

A volumetric pump, the working part of which is a flexible plate fixed at the edges; the plate flexes under the action of a lever or rocker mechanism, a solenoid, or as a result of changes in air or fluid pressure, performing a function equivalent to that of a piston in a reciprocating pump.

Soundproof Diesel Engine Water Pump

Silent self-priming pump truck is a sewage pump with high self-priming capacity designed with open impeller. After the first filling, it can directly self- priming, and the self-priming height reaches 7.6 meters. It is driven by matching diesel engine without external power supply.

Solids Handling Diesel Pumps

Whether bypassing a pump station during repair, keeping critical services operational at a plant, or helping a construction crew finish on time,Super T Series® portable engine-driven pumps keep the liquid flowing.

Silent Self-Priming Pump Truck

Silent self-priming pump truck is a sewage pump with high self-priming capacity designed with open impeller. After the first filling, it can directly self- priming, and the self-priming height reaches 7.6 meters. It is driven by matching diesel engine without external power supply.

Shredder Submersible Pumps

Shredder submersible pumps have a unique helical structure with a sharp edge in the cutting section. On the premise of ensuring the high efficiency of water conservancy performance and exceeding similar products, it also has a certain cutting ability to ensure the superior cutting function of straw, cotton, cloth, baby diapers and other wastes after being chopped and discharged.

Sewage Mud Pump

It is used for pumping domestic, industrial or storm water in cases where it is impossible to drain it by gravity.

Self-Priming Sewage Pump Trailer

Self-priming sewage pump trailer adopts diesel engine with self-priming sewage pump mobile trailer unit. Supporting diesel engine drive, no external power supply. Diesel engine supporting control system, supporting 2 – wheel or 4 – wheel trailer.

Self Suction And Suction Pump

It is understood that self-priming units can remove air currents from the suction pipe.

Self Priming Solids-Handling Pumps

Super U Series pumps are among the most efficient self-priming, solids handling pumps available. Their unique hydraulic design and smooth wall volute casing minimize friction loss and drag.

Self Priming Oil Pumps

The pump is a self-priming centrifugal pump, which has the advantages of simple structure, convenient operation, stable operation, easy maintenance, high efficiency, long life, and strong self-priming ability.

Self Priming Engine Driven Pumps

ZW series self-priming non-clogging sewage pump is a product with a new structure successfully developed on the basis of repeated research on similar technologies at home and abroad.

Self Priming Centrifugal Engine Driven Pumps

Centrifugal self-priming pumps have an interesting working chamber structure – in the form of a snail. The impellers are fixed in the center of the housing. There can be one wheel, then the pump is called a single-stage, or there can be several – a multi-stage design.

Portable Submersible Centrifugal Pumps

All the products of this series are equipped with special lines for acid and corrosion resistance. All bearings of this series are made of NSK bearings, and the rotor shafts are all connected by friction welding process 316. The double-channel mechanical seal design can further protect the leakage of the water pump seal. “O” The ring is made of fluorine rubber, which is resistant to acid, alkali and high temperature.

Portable Muffler Pumping System

For pumping applications where noise levels must be kept to a minimum,it offers a sound-attenuated engine-driven pump unit. Lockable doors prevent unauthorized personnel from tampering with the pump, fuel, engine or controls during unattended service.

Portable Engine Driven Pumps

Portable high volume pumps come standard with a cast iron impeller for abrasion resistance and one-tool service for easy cleaning.

Pneumatic Oil Barrel Pump

Products are used in chemical, petrochemical, dye chemical, water treatment, food and other departments to pump different liquids.

Plastic Foot Valve For Water Pump

The plastic foot valve body is light in weight and strong in corrosion resistance. The body is light in weight and easy to install. The material is hygienic, non-toxic, wear-resistant and easy to disassemble.

Ordinary Screw Centrifugal Pump

One of two types of dynamic vane pumps, in which the working fluid moves in a continuous flow due to the interaction of this flow with the moving rotating rotor blades and the stationary housing blades.

Open Rack Self-Priming Pump Truck

Open rack type self-priming pump, using open impeller design of high self- priming capacity of sewage pump, after the first irrigation, can directly self- priming, and the height of self-priming up to 7.6 meters. Supporting diesel engine drive, no external power supply.

Open Rack Drainage Pump Truck

The open-frame drainage pump truck adopts the sewage pump with high self- priming capacity designed with open impeller. After the first irrigation, it can directly self-priming, and the self-priming height reaches 7.6 meters.

NS Type Self Suction Centrifugal Pump

It is understood that self-priming units can remove air currents from the suction pipe.

Multi-Functional Integrated Drainage Pump Truck

Multi-functional pump truck, including trailer with three functions of power generation, lighting and drainage. The multifunctional vehicle is equipped with portable permanent magnet submersible pump, which is characterized by light weight and large flow.

Mixed Flow Pump

It is understood that self-priming units can remove air currents from the suction pipe.

Mine Drainage Pump Trailer

Mine drainage pump trailer, the use of wear-resistant mine pump supporting diesel engine, professional transport containing hard particles, particles impurity water quality. Supporting diesel engine drive, no external power supply.

Mine Approved Submersible Pumps

WQB series is suitable for underground pipe gallery, sponge city, tunnel construction, petrochemical industry, municipal engineering, urban industry, hospital, hotel, residential area and other places.

Live Over Pressure Centrifugal Pump

It is understood that self-priming units can remove air currents from the suction pipe.

Light Dewatering Submersible Pumps

Slurry pumps for pumping dirty water, dewatering and drainage are used to forcefully lower the groundwater level by pumping it to specially designated places, located, as a rule, lower in the terrain.

Large Flow Self Suction Centrifugal Electric Pump

Centrifugal pumps are mainly used for conveying drilling mud, and can also be used as sand cleaner, desilter, centrifuge feed pump, also can be used as mixing centrifugal pump for hydraulic mixer, and also as refueling pump for refueling pumps and mud pumps.

Large Flow Hand Pressure Centrifugal Electric Pump

Centrifugal pumps are mainly used for conveying drilling mud, and can also be used as sand cleaner, desilter, centrifuge feed pump, also can be used as mixing centrifugal pump for hydraulic mixer, and also as refueling pump for refueling pumps and mud pumps.

Large Flow Drainage Pump Truck

The large discharge pump truck is an efficient centrifugal pump designed with a mixed-flow impeller and is driven by a diesel engine without external power supply. Equipped with vacuum system, strong self – priming ability. Supporting mobile trailer, can support a variety of different types of traction, suitable for a variety of different types of tractor.

Large Flow Double Impeller Hand Pressure Centrifugal Pump

It is understood that self-priming units can remove air currents from the suction pipe.

K90QJ(D)-8T (sand resistant stainless steel type)

A pump immersed below the level of the pumped liquid. This ensures the lifting of liquid from great depths, good cooling of the pump components, and allows the lifting of liquids with gas dissolved in it.

K90QJ(D)-5T (sand resistant stainless steel type)

A pump immersed below the level of the pumped liquid. This ensures the lifting of liquid from great depths, good cooling of the pump components, and allows the lifting of liquids with gas dissolved in it.

K90QJ(D)-3T (sand resistant stainless steel type)

A pump immersed below the level of the pumped liquid. This ensures the lifting of liquid from great depths, good cooling of the pump components, and allows the lifting of liquids with gas dissolved in it.

K90QJ(D)-10T (sand resistant stainless steel type)

A pump immersed below the level of the pumped liquid. This ensures the lifting of liquid from great depths, good cooling of the pump components, and allows the lifting of liquids with gas dissolved in it.

Irrigation Trailer

The irrigation trailer is an efficient irrigation pump designed with a mixed-flow impeller. After adding the bottom valve, it can directly self-priming with a height of about 3-4 meters. Supporting diesel engine drive, no external power supply.

Hydraulic Variable Piston Pump

High-quality motor, high-quality pure copper motor, long service life, quality assurance. Three-cylinder reciprocating with two bores and four speeds.

Hydraulic Powered Submersible Pumps

A new type of diving system with small size, light weight and easy portability, which is mainly used for drainage, early prevention, emergency pumping and drainage, etc.

Horizontal Multistage Pump

TSWA type horizontal multi-stage centrifugal pump is a series of horizontal, single-suction multi-stage and segmented structures, which are newly developed and produced energy-saving products.

Horizontal Multistage Centrifugal Pump

D-type horizontal multistage pump has the characteristics of high efficiency, wide performance range, safe and stable operation, low noise, long life, convenient installation and maintenance, etc.
Send Inquiry

Horizontal End Suction Centrifugal Pump

One of two types of dynamic vane pumps, in which the working fluid moves in a continuous flow due to the interaction of this flow with the moving rotating rotor blades and the stationary housing blades.

Horizontal Direct Connected Centrifugal Pump

One of two types of dynamic vane pumps, in which the working fluid moves in a continuous flow due to the interaction of this flow with the moving rotating rotor blades and the stationary housing blades.

Horizontal Centrifugal Pump Pump Set

One of two types of dynamic vane pumps, in which the working fluid moves in a continuous flow due to the interaction of this flow with the moving rotating rotor blades and the stationary housing blades.

High Pressure Self Suction Sprinkler Centrifugal Pump（Foreward）

It is understood that self-priming units can remove air currents from the suction pipe.

High Pressure Self Suction Sprinkler Centrifugal Pump

It is understood that self-priming units can remove air currents from the suction pipe.

High Pressure Self Sucking Drip Irrigation Centrifugal Pump

It is understood that self-priming units can remove air currents from the suction pipe.

High Pressure Self Priming Pump

It is understood that self-priming units can remove air currents from the suction pipe.

High Pressure Hose

A high-pressure hose is a hose used to transport fire-retardant liquids such as high-pressure water or foam. Traditional high-pressure hoses are rubber-lined and linen braided on the outside.

High Pressure Drip Irrigation Centrifugal Pump

It is understood that self-priming units can remove air currents from the suction pipe.

High Pressure Double Impeller Centrifugal Pump

It is understood that self-priming units can remove air currents from the suction pipe.

High Head Self Priming Pumps

Available in a variety of pump station configurations or stand-alone in 3”, 4” and 6” sizes. The superior solids-handling and increased pressure capabilities of the ULTRA V Series pumps make them ideally suited for a variety of industrial and sewage applications.

Heavy Duty Solids Handling Pump

Designed for economical, trouble-free operation, the superior solids-handling capabilities of the SUPER T Series pumps make them ideally suited for a variety of applications including solids-laden liquids and slurries.

Heavy Duty Self Priming Pumps

ZW series self-priming non-clogging sewage pump is a new structure product developed on the basis of harvester. This pump adopts a combination of self-priming and non-clogging, adopts an axial pump, and returns to the external mixing type.

Heavy Duty Internal Gear Pump

Model GPA Quiet Internal Gear Pumps are manufactured with technology introduced from American Vickers Corp.Two series of single and double-pump and nine types flow of 1.76-63.6mL/r are available.

Heavy Duty Clamp Stainless Steel

Heavy-duty clamps with large cross-section and large clamping force.

Hand Pressure Sprinkler Irrigation Centrifugal Pump

It is understood that self-priming units can remove air currents from the suction pipe.

Hand Pressure Centrifugal Pump Impeller

It is understood that self-priming units can remove air currents from the suction pipe.

Fiberglass Reinforced Plastic Pump

Self Priming 2 Inch Trailer Pump Agricultural High Pressure Diesel Engine Water Pump Gasoline Engine Pump Agricultural Land Drainage

F95QJ(D)-8T (export type/copper pump head, copper compound/sandproof type)

A pump immersed below the level of the pumped liquid. This ensures the lifting of liquid from great depths, good cooling of the pump components, and allows the lifting of liquids with gas dissolved in it.

F95QJ(D)-5T (export type/copper pump head, copper compound/sandproof type)

A pump immersed below the level of the pumped liquid. This ensures the lifting of liquid from great depths, good cooling of the pump components, and allows the lifting of liquids with gas dissolved in it.

F95QJ(D)-3T (export type/copper pump head, copper compound/sandproof type)

A pump immersed below the level of the pumped liquid. This ensures the lifting of liquid from great depths, good cooling of the pump components, and allows the lifting of liquids with gas dissolved in it.

F95QJ(D)-10T (export type/copper pump head, copper compound/sandproof type)

A pump immersed below the level of the pumped liquid. This ensures the lifting of liquid from great depths, good cooling of the pump components, and allows the lifting of liquids with gas dissolved in it.

Engineering Plastic Diaphragm Pump

A volumetric pump, the working part of which is a flexible plate fixed at the edges; the plate flexes under the action of a lever or rocker mechanism, a solenoid, or as a result of changes in air or fluid pressure, performing a function equivalent to that of a piston in a reciprocating pump.

Engine Silent Pumps

Designed to deliver all the benefits of our sound-attenuated silent pumps, the ReliaPrime® emergency bypass station operates on natural gas, making it another quiet, efficient and environmentally friendly addition to our family of industry leading engine-driven pumps.

Engine Self-Priming Sound-Attenuated Pumps

Designed to deliver all the benefits of our sound-attenuated silent pumps, the ReliaPrime® emergency bypass station operates on natural gas, making it another quiet, efficient and environmentally friendly addition to our family of industry leading engine-driven pumps.

Engine High-Lift Solids Treatment Pump

10 Series® pumps are specifically designed for handling solids, corrosive liquids and slurries. They have few moving parts, so maintenance is minimal.

Engine Dry Prime Solids Handling Pumps

80 Series® pumps are designed for non-stop workloads. The straight-in-suction design of these high-efficiency pumps guarantees quick, positive self-priming and allows them to operate at high suction levels than most other self-priming centrifugal pumps.

Engine Driven Pumps For Garbage Disposal

Ultra V Series® engine-driven, self-priming centrifugal pumps are designed for heavy-duty solids handling, high-head applications. Advanced features allow for easy access during maintenance.

Electric Operated Diaphragm Pump

1. All kinds of highly toxic, flammable and volatile liquids. 2. All kinds of strong acid, strong alkali and strong corrosive liquid. 3. The medium with higher temperature can be transported up to 150℃.

Ductile Iron Foot Valve

The bottom valve, also known as the check valve, is a low-pressure flat valve. Its function is to ensure the one-way flow of the liquid in the suction pipe to make the pump work normally.

Double Sealed Movable Joint Agricultural Centrifugal Pump

One of two types of dynamic vane pumps, in which the working fluid moves in a continuous flow due to the interaction of this flow with the moving rotating rotor blades and the stationary housing blades.

Double Impeller High Pressure Centrifugal Pump Self Suction Sprinkler

It is understood that self-priming units can remove air currents from the suction pipe.

Dirty Liquids Centrifugal Pump

It is widely used in electric power, metallurgy, mining, coal, building materials, chemical industry and other industrial sectors.

Diesel Multi-Stage Pump Trailer

Diesel multi-stage pump trailer adopts multi-stage high head diesel engine to solve the problem of ultra-long distance water supply. Supporting diesel engine drive, no external power supply.

Diesel Engine Pressure Test Pumps

Diaphragm pumps help you pump muddy, mucky, sand-laden liquids and slow seepage for construction, agricultural and industrial applications that require the pumps to run dry for extended lengths of time.

Diesel Clean Water Pump Trailer

Diesel clean water pump trailer, using clean water pump matching diesel engine, professional transport does not contain particles of water. Supporting diesel engine drive, no external power supply.

Common Self Suction Centrifugal Pump

It is understood that self-priming units can remove air currents from the suction pipe.

Centrifugal Sand Pump F – Inlet And Outlet Flanges

Sand Pump is a horizontal single casing slurry pump with wide bore for pumping sand or slurry containing large particles.

Centrifugal Pump For Gasoline Generating Set

The pumps are designed for pumping clean liquids that do not contain abrasive impurities and are not aggressive to the materials from which the pump is made, in water supply, air conditioning, circulation and heat supply systems, in domestic and industrial areas.

Aluminum Alloy Quick Coupling

A quick connector is a connector that can be connected or disconnected without tools.

Aluminum Alloy Diaphragm Pump

A volumetric pump, the working part of which is a flexible plate fixed at the edges; the plate flexes under the action of a lever or rocker mechanism, a solenoid, or as a result of changes in air or fluid pressure, performing a function equivalent to that of a piston in a reciprocating pump.

Aluminum Alloy Ball Joint

​Used in industry, agriculture, construction and various pipeline facilities, it is a joint that can connect or disconnect pipelines without tools. It is composed of internal and external threads and male and female parts.

Agricultural Self-Priming Pump

Agricultural irrigation truck uses a single cylinder diesel engine with a belt wheel to drive self-priming irrigation pump. Supporting single cylinder diesel engine drive, no external power supply, starting mode can be hand or battery pneumatic.

Agricultural Centrifugal Pump

It is understood that self-priming units can remove air currents from the suction pipe.

Submit your request